Water Meter FAQ
If your water meter is located indoors, it is commonly found in a basement, crawl space, or utility closet. Typically, indoor meters are located where the water line enters the structure. Your meter may also be located outside, in an underground “meter pit.”
The method by which the water meter is read varies depending on your location, the age of the meter, and the type of meter. The latest technologies allow us to read meters via radio frequency which can be done by walking or driving by the structure. We are moving towards reading via tower collection in some areas as well. However, there are still meters that are read from devices outside the structure that are either viewed or touched to obtain the reading. There are also meters that do not have a reading device at all. These meters are read by viewing and recording the reading from the meter's register.
Watch How SUEZ Reads Your Water Meter
A CCF is an abbreviation for 100 Cubic Feet, which equals 748 gallons.
There are 7.48 gallons in one cubic foot.
The requirements for how often a meter is to be tested and/or replaced vary depending on the service territory. Please contact our Customer Service Center at (800) 422-0141
It is your property’s valve that turns water on or off.
The shut-off valve for the home/structure is typically located on the water line just after it enters the building. The exact location may vary since this is your private plumbing valve.
A radio device allows the company to read your water meter remotely. It is an efficient way to read our meters and provide you with an accurate bill based on the actual meter reading.